A Crude Awakening

Amsoil Logo
Wake Up Your Vehicle With
More MPG
More Horsepower
Longer Engine Life
Fatter Wallet For You

Amsoil vs Petroleum Oil 

  With petroleum oil in the engine…88% of the internal contamination comes from the oil.   This is because of the chemical reactions within the engine’s crankcase between petroleum oil and various by-products of combustion, including sulfur, heat and water.   It’s not the by-products themselves that make the oil dirty.    It’s the chemical reactions caused by the by-products.

   AMSOIL is not susceptible to these chemical reactions in the crankcase. To understand this, we must look at the differences in molecular structure of petroleum and AMSOIL.

   Petroleum is a hydrocarbon.    AMSOIL is a diester formed by combining fatty acids with isopropyl alcohol in a five million dollar synthesis machine.   

   AMSOIL is 100% saturated.   Meaning it’s made up entirely of tightly bonded molecules that are extremely difficult to break apart.

   Petroleum oils are less than 55% saturated…often less than 50%. This means that almost half of every quart of oil you put in your engine is unsaturated…or loosely bonded molecules of hydrocarbons.    It is not the saturated part of petroleum that causes difficulties…it is the half that’s unsaturated.

   There are several damaging chemical reactions that are constantly happening to the unsaturated or loosely bonded hydrocarbons.  

Some of the more serious are:

    • Sulfur reacts with petroleum oil to form sulfuric acid.   This happens as soon as you start your engine with freshly changed oil.
    • Sulfuric acid reacts chemcially with the loosely bonded hydrocarbon molecules to precipitate out tar and sludge.
    • The unsaturated hydrocarbons oxidize at high temperatures to form gum and varnish.
    • Condensation enters the loose molecular structure and turns the oil gray.    Water has a higher surface tension than oil.   It tends to cling to metal surfaces causing rust and corrosion.
    • Polymers added to petroleum oil improve viscosity shear and break, causing the thickening of the lubricant.

AMSOIL’s high surface tension (higher than water) causes it to cling to metal and to sheath tiny particles of water into a glove of AMSOIL until the temperature of the water rises above 212 degrees Fahrenheit.   Then 100% of the water evaporates preventing any moisture build-up in the motor or drive train.    Condensation can therefore…be easily tolerated with AMSOIL.

AMSOIL’s Film Strength Is Over 3250 PSI…
Petroleum Ranges From 250-550 PSI

AMSOIL has extremely high film strength. Film strength refers to the amount of pressure it takes to squeeze the lubricant out from between two flat pieces of steel.    Petroleum oil ranges from 250-550 psi.    AMSOIL’s film strength is over 3250 psi.

Therefore…the entire inside of the engine “floats” on a film of Amsoil.    This is the reason for the average increase in gas mileage of 4-6% and 6% boost in horsepower that users are experiencing.

AMSOIL is by nature…a high detergent lubricant.    It has been specifically formulated for high detergency without using detergent additives that quickly break down and wear out.    This is possible becasue of the chemical makeup of AMSOIL.

As a result…AMSOIL has the ability to remove tar…sludge…varnish and other deposits from the inside of the crankcase…leaving wear surfaces mirror clean.

Gum and varnish are the causes of the following problems in engines:

  • Gummy rings…the MAIN reason why engines burn oil.
  • Sticky lifters…may cause clattering and burned valves.
  • Varnish glazed piston walls…increases oil consumption.
  • Varnish glazed seals…the most common cause of oil leaks.

AMSOIL’s extremely high detergency means that it is capable of reducing and/or eliminating the above problems.
AMSOIL has a very high seal compatiblilty.    Petroleum oil shrinks cork gaskets and requires a “swelling agent” additive to prevent this or limit its effect.
AMSOIL has the ability to restore petroleum-oil-hardened neopreme and rubber seals to their original resiliency.    AMSOIL does not shrink cork gaskets.

AMSOIL Gives You The Luxury
Of Changing Your Oil Once A Year
Or Every 25,000 Miles!

   Why 25,000 miles?    In laboratory tests…the first signs of non-exterior contaminants show up sometime after 30,000 miles.    25,000 miles is therefore a conservative figure.    Samples of oil can be sent to any oil testing laboratory for analysis.  AMSOIL has a kit available for that…Analysis Kit#G-1451 should a user feel uneasy about extended service.

Let’s Get Started 3 Ways To Purchase Amsoil Products

1.   You can purchase Amsoil products at retail prices by going to   Amsoil on-line-store or by calling Amsoil at 800-956-5695 from   8 am to 5 pm Central Time…Monday – Friday.   Thank you for using my ID#516778 as your referral.

2.   Save 25% off retail prices…become a preferred customer …   Cost: $10 for 6 months…$20 for 1 year (Canada $30).   When signing up as a preferred customer…you’ll receive your   own ID# giving you access to the on-line store to purchase all   your products at wholesale. You can call Amsoils toll free ordering number at 800-777-7094 to order at wholesale.

Preferred Customers receive an information kit on AMSOIL   products and the monthly AMSOIL Action News magazine containng powerful testimonies and updates about the Amsoil   products.   Thank you for using my ID#516778 as your referral.

3.   Start your own business… Become a dealer … Cost: $30 yearly (Canada $45)…save 25% off retail prices…and share the Amsoil products with your friends…sign up Preferred Customers and Dealers under you and earn a commission off their orders.When signing up as a Dealer…you’ll receive your own ID# giving you access to the on-line store to purchase all your products at wholesale.   You can call Amsoils toll free ordering number at 800-777-7094 to order at wholesale.

Included in your subscription is a monthly Amsoil catalogue full of stories and powerful testimonies about the Amsoil products.
Thank you for using my ID#516778 as your referral.

Have you ever wanted to get paid 24 hrs a day…7 days a   week?   Here’s your Amsoil opportunity!

Click Here To Look Up Your Oil and Filter For Your Vehicle

When you get into the “Application Guide”…you may need help.   Call me.   It’s very important that you get the right oil and filters for your vehicle.  Once you have the oil and filter numbers…it’s easy to order your products online.

If you’d rather order by phone…call Amsoil at 800-777-7094 Monday – Friday 8 am – 5 pm CST.

If you’d like to order products at retail price…call the same number…or order online.

You can call Amsoil for technical support at 715-399-8324…Monday – Friday 8 am – 5 pm CST.  You’ll need my referral# 516778.   They too can help you match the oil and filter for your vehicle or equipment.

Happy Trails…
John Schlimmer
Independent Amsoil Dealer

Thank you for using my ID#516778 when ordering.

PS…Most Japanese models take the Ea15K oil filter…good for 15,000 miles.   If you drive over 15,000 miles a year…change the oil filter…no need to change the oil until 25,000 miles or one year.   European cars … oil and filter need to be changed at the recommended mileage by the owners manual.

Leave A Reply (No comments so far)

No comments yet

930,000 Mile Engine Tear Down…No Sludge…Very Little Engine Wear

350 Engine Tear Down...Clean
< h1 style="text-align:center;">Center-aligned heading